How to correctly heat up the tempering furnace

Heating up a tempering furnace properly is crucial for achieving the desired mechanical properties in materials like metals and glass. Here are general guidelines for heating up a tempering furnace:

Tempering furnace heating method

1. Preparation and Safety Checks:

Inspection: Before starting, inspect the furnace for any signs of damage or wear. Check the integrity of heating elements, thermocouples, insulation, and other components.

Safety Equipment: Ensure that all safety equipment, such as fire extinguishers and protective gear, is readily available and in good condition.

Ventilation: Verify that the furnace area is well-ventilated to handle fumes and gases that may be released during heating.

2. Preheating Procedures:

Initial Warm-Up: Start the furnace at a low temperature to gently warm up the internal components. This helps to prevent thermal shock to the materials and the furnace lining.

Incremental Heating: Gradually increase the temperature in small increments. The specific rate of increase will depend on the material being tempered and the furnace design. For example, a common practice is to increase the temperature by 50°C to 100°C (122°F to 212°F) per hour.

3. Reaching Target Temperature:

Uniform Heating: Ensure that the heating process is uniform throughout the furnace chamber. This may involve adjusting the position of items inside the furnace or using fans to circulate the heat.

…

For more detailed information about the tempering furnace heating method, please click here: https://www.shencglass.com/en/a/news/tempering-furnace-heating-method.html